Bu hanımın yapılışı içeride...Finished Measurements
6½ inches tall
Materials
Cascade 220 [100% Peruvian Highland Wool; 220 yards/200 meters per 3.5 ounce/100 gram skein];
8505 White; ⅓ skein
9407H Heathered Celery; ¼ skein
Cascade 220 Superwash [100% Superwash Wool; 220 yards/200 meters per 3.5 ounce/100 gram skein];
863 Cordovan; ¼ skein
Cascade Eco Cloud [70% Undyed Merino Wool, 30% Undyed Baby Alpaca; 164 yards/150 meters per 3.5 ounce/100 gram skein];
1803 Fawn: ½ skein
Recommended needle sizes
Size F-5/4.0mm crochet hook
Notions
Embroidery floss: DMC Six Strand Embroidery Floss
335 Rose: 10 inches
Eyes: Darice 9mm black craft eyes
Darning needle
Embroidery needle
Fiberfill
Locking stitch markers
335 Rose: 10 inches
Eyes: Darice 9mm black craft eyes
Darning needle
Embroidery needle
Fiberfill
Locking stitch markers
Gauge
As tight as you can possibly crochet
Pattern Notes
Doll is crocheted in the round and crocheted in continuous spirals without joining the rounds; the rounds will increase and decrease in increments of 5. You will need a stitch marker to keep track of where the beginning of each round starts; move the marker up to the first stitch of the next round after finishing the previous one. The pieces that will be sewn together to complete. Hair is embroidered yarn over a wig cap.
Skills Required
Crocheting in the round, adjustable ring, embroidering
INSTRUCTIONS
Head
Rnd 1: In tan, make an adjustable ring and work 5 sc in the ring, do not join, place marker to mark the first stitch of the next rnd: 5 sc.
Rnd 2: [2 Sc in each sc] 5 times: 10 sc.
Rnd 3: [Sc in next sc, 2 sc in next sc] 5 times: 15 sc.
Rnd 4: [Sc in next 2 sc, 2 sc in next sc] 5 times: 20 sc.
Rnd 5: [Sc in next 3 sc, 2 sc in next sc] 5 times: 25 sc.
Rnd 6: [Sc in next 4 sc, 2 sc in next sc] 5 times: 30 sc.
Rnd 7: [Sc in next 5 sc, 2 sc in next sc] 5 times: 35 sc.
Rnd 8: [Sc in next 6 sc, 2 sc in next sc] 5 times: 40 sc.
Rnd 9: [Sc in next 7 sc, 2 sc in next sc] 5 times: 45 sc.
Rnds 10-17: Sc in each sc around. Also, at this point it’s a good idea to put the eyes in if you’re planning on using them before it gets too tight to insert anything. I put the eyes 9 sts apart, in Rnd 14.
Rnd 18: [Sc in next 7 sc, sc2tog] 5 times: 40 sc.
Rnd 19: [Sc in next 6 sc, sc2tog] 5 times: 35 sc.
Rnd 20: [Sc in next 5 sc, sc2tog] 5 times: 30 sc.
Rnd 21: [Sc in next 4 sc, sc2tog] 5 times: 25 sc.
Rnd 22: [Sc in next 3 sc, sc2tog] 5 times: 20 sc.
Rnd 23: [Sc in next 2 sc, sc2tog] 5 times: 15 sc. Stuff the head with poly-fil/wool as tightly as you can get it, since essentially you’ll be making a ball and won’t be able to stuff again.
Rnd 24: [Sc in next sc, sc2tog] 5 times: 10 sc.
Rnd 25: Sc2tog 5 times: 5 sc. Fasten off; using the yarn and a yarn needle close up the hole by stitching back and forth across the little opening, weave yarn into head. Using the dark pink colored embroidery floss, embroider a wide fly stitch to create the mouth onto her face hiding the knot on the underside of the head.
Rnd 2: [2 Sc in each sc] 5 times: 10 sc.
Rnd 3: [Sc in next sc, 2 sc in next sc] 5 times: 15 sc.
Rnd 4: [Sc in next 2 sc, 2 sc in next sc] 5 times: 20 sc.
Rnd 5: [Sc in next 3 sc, 2 sc in next sc] 5 times: 25 sc.
Rnd 6: [Sc in next 4 sc, 2 sc in next sc] 5 times: 30 sc.
Rnd 7: [Sc in next 5 sc, 2 sc in next sc] 5 times: 35 sc.
Rnd 8: [Sc in next 6 sc, 2 sc in next sc] 5 times: 40 sc.
Rnd 9: [Sc in next 7 sc, 2 sc in next sc] 5 times: 45 sc.
Rnds 10-17: Sc in each sc around. Also, at this point it’s a good idea to put the eyes in if you’re planning on using them before it gets too tight to insert anything. I put the eyes 9 sts apart, in Rnd 14.
Rnd 18: [Sc in next 7 sc, sc2tog] 5 times: 40 sc.
Rnd 19: [Sc in next 6 sc, sc2tog] 5 times: 35 sc.
Rnd 20: [Sc in next 5 sc, sc2tog] 5 times: 30 sc.
Rnd 21: [Sc in next 4 sc, sc2tog] 5 times: 25 sc.
Rnd 22: [Sc in next 3 sc, sc2tog] 5 times: 20 sc.
Rnd 23: [Sc in next 2 sc, sc2tog] 5 times: 15 sc. Stuff the head with poly-fil/wool as tightly as you can get it, since essentially you’ll be making a ball and won’t be able to stuff again.
Rnd 24: [Sc in next sc, sc2tog] 5 times: 10 sc.
Rnd 25: Sc2tog 5 times: 5 sc. Fasten off; using the yarn and a yarn needle close up the hole by stitching back and forth across the little opening, weave yarn into head. Using the dark pink colored embroidery floss, embroider a wide fly stitch to create the mouth onto her face hiding the knot on the underside of the head.
Hair/Wig Cap
The wig cap will be crocheted to fit around the head stopping right before you get to the point where you start decreasing.
Rnd 1: In brown, make an adjustable ring and work 5 sc in the ring, do not join, place marker to mark the first stitch of the next rnd: 5 sc.
Rnd 2: [2 Sc in each sc] 5 times: 10 sc.
Rnd 3: [Sc in next sc, 2 sc in next sc] 5 times: 15 sc.
Rnd 4: [Sc in next 2 sc, 2 sc in next sc] 5 times: 20 sc.
Rnd 5: [Sc in next 3 sc, 2 sc in next sc] 5 times: 25 sc.
Rnd 6: [Sc in next 4 sc, 2 sc in next sc] 5 times: 30 sc.
Rnd 7: [Sc in next 5 sc, 2 sc in next sc] 5 times: 35 sc.
Rnd 8: [Sc in next 6 sc, 2 sc in next sc] 5 times: 40 sc.
Rnd 9: [Sc in next 7 sc, 2 sc in next sc] 5 times: 45 sc.
Rnds 10 and 11: Dc in each st around ----- 45 sts.
Fasten off, and leave a length to sew the cap to the head after you’ve made the hair. After attaching the wig cap to the head, cut a length of yarn that you are comfortable working with and begin to embroider a hairstyle onto the head. The easiest way I find to do this is to decide where the hair part will be and then do one side at a time with each piece of yarn, going back and forth filling in one side of the head making sure there are no gaps until you run out of yarn. Each time you run out of yarn, rethread the needle and work on the opposite side to ensure that you’re filling in the hair evenly. Continue to do this until you are satisfied with the appearance of the hair and fasten off that last piece of yarn and weave it into the hair hiding the end.
Rnd 1: In brown, make an adjustable ring and work 5 sc in the ring, do not join, place marker to mark the first stitch of the next rnd: 5 sc.
Rnd 2: [2 Sc in each sc] 5 times: 10 sc.
Rnd 3: [Sc in next sc, 2 sc in next sc] 5 times: 15 sc.
Rnd 4: [Sc in next 2 sc, 2 sc in next sc] 5 times: 20 sc.
Rnd 5: [Sc in next 3 sc, 2 sc in next sc] 5 times: 25 sc.
Rnd 6: [Sc in next 4 sc, 2 sc in next sc] 5 times: 30 sc.
Rnd 7: [Sc in next 5 sc, 2 sc in next sc] 5 times: 35 sc.
Rnd 8: [Sc in next 6 sc, 2 sc in next sc] 5 times: 40 sc.
Rnd 9: [Sc in next 7 sc, 2 sc in next sc] 5 times: 45 sc.
Rnds 10 and 11: Dc in each st around ----- 45 sts.
Fasten off, and leave a length to sew the cap to the head after you’ve made the hair. After attaching the wig cap to the head, cut a length of yarn that you are comfortable working with and begin to embroider a hairstyle onto the head. The easiest way I find to do this is to decide where the hair part will be and then do one side at a time with each piece of yarn, going back and forth filling in one side of the head making sure there are no gaps until you run out of yarn. Each time you run out of yarn, rethread the needle and work on the opposite side to ensure that you’re filling in the hair evenly. Continue to do this until you are satisfied with the appearance of the hair and fasten off that last piece of yarn and weave it into the hair hiding the end.
Body
After making the two arms and legs, the body will just be a torso, then the petals and wings will be crocheted and sewn on.
Arms (make 2)
Rnd 1: In flesh color, make an adjustable ring and work 6 sc in the ring, do not join, place marker to mark the first stitch of the next rnd: 6 sc.
Rnd 2: [Sc, 2 sc in next sc] 3 times: 9 sc.
Rnd 3: Tr in next sc, sc2tog, [sc in next sc, sc2tog] 2 times: 6 sts.
Rnds 4-10: Sc in each st around.
Fasten off leaving a length of yarn to sew the arm to the body. Do NOT stuff the arm. Put aside until you’ve finished with the body.
Rnd 2: [Sc, 2 sc in next sc] 3 times: 9 sc.
Rnd 3: Tr in next sc, sc2tog, [sc in next sc, sc2tog] 2 times: 6 sts.
Rnds 4-10: Sc in each st around.
Fasten off leaving a length of yarn to sew the arm to the body. Do NOT stuff the arm. Put aside until you’ve finished with the body.
Legs (make 2)
Rnd 1: In flesh color, make an adjustable ring and work 7 sc in the ring; join with slip st to first sc; place marker to mark the first stitch of the next rnd: 7 sc.
Rnd 2: 2 Sc in first sc, 2 hdc in next sc, 2 sc in next sc, sc in last 4 sc; do not join, begin working in continuous rnds: 10 sts.
Rnd 3: Sc in first sc, 2 sc in next sc, 2 hdc in each of next 2 hdc, 2 sc in next sc, sc in next 5 sc: 14 sts.
Rnd 4: Sc in first 3 sc, sc2tog twice, sc in next 7 sc: 12 sc.
Rnd 5: Sc in first 2 sc, sc2tog twice, sc in next 6 sc: 10 sc.
Rnds 6-10: Sc in each sc around.
Fasten off leaving a length of yarn to sew the leg to the body. Stuff the foot and leg to capacity.
Rnd 2: 2 Sc in first sc, 2 hdc in next sc, 2 sc in next sc, sc in last 4 sc; do not join, begin working in continuous rnds: 10 sts.
Rnd 3: Sc in first sc, 2 sc in next sc, 2 hdc in each of next 2 hdc, 2 sc in next sc, sc in next 5 sc: 14 sts.
Rnd 4: Sc in first 3 sc, sc2tog twice, sc in next 7 sc: 12 sc.
Rnd 5: Sc in first 2 sc, sc2tog twice, sc in next 6 sc: 10 sc.
Rnds 6-10: Sc in each sc around.
Fasten off leaving a length of yarn to sew the leg to the body. Stuff the foot and leg to capacity.
Torso
Rnd 1: In green, make an adjustable ring and work 6 sc in the ring; join with slip st to first sc; place marker to mark the first stitch of the next rnd: 6 sc.
Rnd 2: [2 Sc in each sc] 6 times: 12 sc.
Rnd 3: [Sc in next sc, 2 sc in next sc] 6 times: 18 sc.
Rnds 4-11: Sc in each sc around.
Change the yarn to tan at the end of this round.
Rnd 12: With tan, sc in blo of each sc around.
Fasten off and leave a length of yarn to sew the neck to the head. Stuff to capacity.
Rnd 2: [2 Sc in each sc] 6 times: 12 sc.
Rnd 3: [Sc in next sc, 2 sc in next sc] 6 times: 18 sc.
Rnds 4-11: Sc in each sc around.
Change the yarn to tan at the end of this round.
Rnd 12: With tan, sc in blo of each sc around.
Fasten off and leave a length of yarn to sew the neck to the head. Stuff to capacity.
Petals (make 9)
Rnd 1: In white, make an adjustable ring and work 4 sc in the ring; do not join, place marker to mark the first stitch of the next rnd: 4 sc.
Rnd 2: [Sc in next sc, 2 sc in next sc] 2 times: 6 sc.
Rnd 3: [Sc in next 2 sc, 2 sc in next sc] 2 times: 8 sc.
Rnds 4-6: Sc in each sc around: 8 sc.
Rnd 7: [Sc in next 2 sc, sc2tog] 2 times: 6 sc.
Rnd 8: [Sc in next sc, sc2tog] 2 times: 4 sc.
Fasten off, and weave in the remaining yarn. Put them aside until you’ve finished with the body.
Rnd 2: [Sc in next sc, 2 sc in next sc] 2 times: 6 sc.
Rnd 3: [Sc in next 2 sc, 2 sc in next sc] 2 times: 8 sc.
Rnds 4-6: Sc in each sc around: 8 sc.
Rnd 7: [Sc in next 2 sc, sc2tog] 2 times: 6 sc.
Rnd 8: [Sc in next sc, sc2tog] 2 times: 4 sc.
Fasten off, and weave in the remaining yarn. Put them aside until you’ve finished with the body.
Wings (make 4)
Rnd 1: In green, make an adjustable ring and work 4 sc in the ring; do not join, place marker to mark the first stitch of the next rnd: 4 sc.
Rnd 2: [Sc in next sc, 2 sc in next sc] 2 times: 6 sc.
Rnd 3: [Sc in next 2 sc, 2 sc in next sc] 2 times: 8 sc.
Rnds 4-6: Sc in each sc around.
Rnd 7: [Sc in next 2 sc, sc2tog] 2 times: 6 sc.
Rnd 8: [Sc in next sc, sc2tog] 2 times: 4 sc.
Fasten off each wing, and weave in the remaining yarn. Put them aside until you’ve finished with the body.
Rnd 2: [Sc in next sc, 2 sc in next sc] 2 times: 6 sc.
Rnd 3: [Sc in next 2 sc, 2 sc in next sc] 2 times: 8 sc.
Rnds 4-6: Sc in each sc around.
Rnd 7: [Sc in next 2 sc, sc2tog] 2 times: 6 sc.
Rnd 8: [Sc in next sc, sc2tog] 2 times: 4 sc.
Fasten off each wing, and weave in the remaining yarn. Put them aside until you’ve finished with the body.
FINISHING
If you haven’t joined the arms, then just pinch the top of each one together and sew it closed, and then sew the arms around the top of the body wherever you’d like them to be.
Sew the legs to the bottom of the torso, making sure that they are securely attached; once comfortable with the security of each leg, weave in the remaining yarn.
Using an 18 inch length of green yarn, attach each of the petals to Rnd 9 of the torso, making sure that each petal is attached to 2 of the stitches in the round. Weave in the remaining yarn when you are comfortable with the security of the petals. At this point you can sew the wings to the back of the torso using the remaining yarn, or you can cut another length of the green yarn to attach the wings.
Sew the body to the head, going around until you’re comfortable with the security of the stitching, when you’ve used up most of the yarn, finish by by inserting the needle through the neck and pulling it out the other side then doing that again and tugging tightly while you snip the remaining yarn as closely as you can get to the neck, move the head around a bit and the end will work it’s way back into the body.
Kaynak burası.
Hiç yorum yok:
Yorum Gönder